Precautions for high pressure hose:

The high-pressure hose can be manually connected or disconnected under high pressure, with compact structure and high working pressure.
Precautions for high pressure hose:

1.high pressure hoses and hose assemblies that exceed the storage life or service life must be tested and identified before they can continue to be used.
2.Use the hose length correctly. The length of hose will change under high pressure, and the change of length is caused by mechanical movement.
3.The high-pressure hose and hose assembly shall not be used beyond the design working pressure.
4.The temperature of the medium conveyed by the hose and hose assembly shall not exceed -40 ° C to 120 ° C.
5.High pressure hoses and hose assemblies should be kept clean, and the interior should be clean (especially acid transmission pipes, spray pipes and mortar pipes). Prevent foreign matters from entering the inner cavity, damage the equipment and hinder fluid transmission.
6.High pressure hoses and hose assemblies must not be used under torsion.
7.Hoses and hose assemblies shall be handled with care, and shall not be dragged on sharp and rough surfaces, bent or leveled.
8.Do not use the hose and hose assembly below the small bending radius of the high-pressure hose, otherwise it will hinder the hydraulic transmission and material transportation or damage the hose assembly.
9.High pressure hoses and hose assemblies can only be used to transport design materials.